It has been seen that most of the apartments and houses are constructed in such manner that its efficiency for heating and cooling mainly depends on the airtight condition. It may also save energy and consider the house to be safe for you. The air ventilation system is so air tight that if anything enters in the system it can cause harm and disgrace to the people. Air duct cleaning involves cleaning of heat and cooling the components of the system of the HVAC system. This system deals with supply and return of air in the ducts, registers, fan motor, heating and cooling coils. If you want to get this at home, duct-cleaning project is considered to be relatively easy and this can be done by undertaking few steps.
The traditional method of air duct cleaning Kennesaw involves insertion of big vacuum hose in the duct that sucks most dirt and the contaminated by products. These hose is portable, this either makes use of gasoline or electric power and this can run the sucking machine. The air ducts are usually open in the sitting room, bedroom and other places of living. This is the reason for the ventilators to have vent covers, registers or return air grilles on them.You can get an air duct area for right inspection of the tools. This needs a screwdriver and gloves to do all cleaning work. You may also require a cleaning brush, vacuum cleaner or rag at such times. It is important to make sure that the floor around the air duct is clean as it prevents the small objects to fall inside in the process of removing the air duct covers.
Firstly, you should unscrew them with a screwdriver for air duct cleaning. You may use a rag or a sponge and soak it in hot water to clean your home and put the sunlight away and avoid moisture by using a paper napkin for drying them. You should pay attention to wall and clean it in the best possible manner. The walls may be covered with filters and use brush and rag to wipe away dirt from the strong force of vacuum cleaner that can also damage the wall. The idea of cleaning the dirt as well as the duct is an amazing idea and you can undertake these steps accordingly. The whole system of HVAC should be properly inspected and cleaned so that the air filters is maintained in the best way. After completing your vacuuming, put on the air grilled plates on the vent. After getting them screwed, you may use the vacuum to remove all dust particles that may get trapped when you vacuum the air ducts.